Locate and position your water butt in its ideal spot.

Install your diverter slightly lower than the top of your water butts.

You can position your RAINPOD at any level under the diverter. Ideally leaving at least a space for a bucket above the ground. Also, ensure the water travels in a straight light from the diverter to your RAINPOD, avoid hose from sagging to prevent air locks.

Mark the top corner bracket using a pencil.

Remove bracket from RAINPOD, align bracket up with previous step and mark out the screw hole.

Using a 7mm drill bit, drill out hole, add rawl plug provided and attach top bracket.

Attach RAINPOD to top bracket. Watch fingers as these brackets are super strong. Fit bottom bracket as previous steps.

Tighen up screws and attach RAINPOD to both brackets. 

Connect RAINPOD to diverter & connect to your water butts.